Not boot after power down by a cat

[mahesh]

I need help to repair booting.

What happen:
Cat press power button 5 sec and forced power off.
After the happening, PC does not boot.

What message shown on screen:
hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19)
/dev/nvme0np2: clean, xxx/yyy files, aaa/bbb blocks
nouveau 0000:01:00.0: unknown chipset (19300a1)

What I did:
>1st trial
1) Enter recovery mode from GRUB menue
2) root terminal and install boot-repair
3) resume and login (maybe ram disk env) with my account
4) run boot-repair and did standard repair
5) reboot -> not boot(same message)

>2nd trial
1) Enter recovery mode from GRUB menue (same as 1st trial)
2) update bootloader
3) reboot -> not boot(same message)

>3rd trial
1) Enter recovery mode from GRUB menue(same as 1st trial)
2) update bootloader
3) resume and login(same as 1st trial)
4) run boot-repair with default option
5) reboot -> not boot(same message)
https://paste.ubuntu.com/p/CcsY9dG8Gn/

Regards,
stakano