Need to partition an SSD full of /dev/loops

[kalpana]

Hello to one and all, I'm stumped.

Trying to install 20.04 on an old MacBook Air for a friend and on her drive I have found something very similar to this;

Code:

Code Select Expand

sudo fdisk -l

Disk /dev/loop15: 3.7 MiB, 3821568 bytes, 7464 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop16: 54.6 MiB, 57274368 bytes, 111864 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop17: 140.7 MiB, 147501056 bytes, 288088 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop18: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop19: 42.8 MiB, 44879872 bytes, 87656 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
My problem is that using Gparted from a live USB drive I can't see any partitions to work with.

How can I get rid of all these 'loops' and be able partition the SSD so as to install 20.04?