Format SSD disk - Error formatting volume (Error wipping device: Failed to probe

[kalpana]

I have new portable SSD disk and I want to format it. Problem is that it is not possible as I did in past over Disks utility.

I followed also lot of instructions from forums but I didn't acchive success result.
Here is some additional information which I got:

lsblk -ape7
Code:

Code Select Expand

NAME             MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
/dev/sda           8:0    0   3,8T  0 disk
/dev/nvme0n1     259:0    0 476,9G  0 disk
├─/dev/nvme0n1p1 259:1    0   512M  0 part /boot/efi
└─/dev/nvme0n1p2 259:2    0 476,4G  0 part /var/snap/firefox/common/host-hunspell
sudo fsck /dev/sda
Code:

Code Select Expand

fsck from util-linux 2.37.2
e2fsck 1.46.5 (30-Dec-2021)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sda

The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem.  If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
 or
    e2fsck -b 32768 <device>

sudo e2fsck -b 8193 /dev/sda
Code:

Code Select Expand

e2fsck 1.46.5 (30-Dec-2021)
e2fsck: Bad magic number in super-block while trying to open /dev/sda


The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem.  If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
 or
    e2fsck -b 32768 <device>I tried to fix it also over GParted but when I want to create new partition I got message that I should create partition table ... I got input output error so I tried it again again and than it was maybe created. Then I wanted to format it to ntfs -> apply commands but again libpartederror during write ..


Thanks a lot for help.