After struggeling quite a time to get my China mobile working I want to share my experiences. This is according to my 12.04 installation. I am not sure if you will need all or less files to get it done. I for one needed all these steps and took me days to find out.
1. The kio-mtp file was missing:
Code:
sudo apt-get install kio-mtp
2. Now we need some more essential files:
Code:
sudo apt-get install libmtp-common mtp-tools libmtp-dev libmtp-runtime libmtp9 mtpfs
3. Update of MTP Pakage (my device was not working with older ones)
Code:
./configure
then
Code:
make
Code:
sudo checkinstall
If you have not done already please install "checkinstall" - so it is easier to remove these packages later on.
You will get a libmtp_1.1.9-1_amd64.deb file which you should install by klicking on it.
4. We have to add udev rules:
Added rule for device in "/lib/udev/rules.d/69-libmtp.rules".:
Code:
# Xiaomi Redmi Note 2 (MTP)
#ATTR{idVendor}=="2717", ATTR{idProduct}=="ff18", SYMLINK+="libmtp-%k", MODE="660", GROUP="audio", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"Code:
# Xiaomi Redmi Note 2 (MTP+ADB)
ATTR{idVendor}=="2717", ATTR{idProduct}=="ff48", SYMLINK+="libmtp-%k", MODE="660", GROUP="audio", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The numbers 2717 und ff48 / ff18 you will find out by using "lsusb" or from "sudo mtp-detect | grep idVendor" AND "mtp-detect | grep idProduct")
Fill these numbers in according to your mobile!!!
Code:
sudo service udev restart
No reboot needed.
Some general things:
a) take a good USB cable. Not the cheapest one
b) insert your mobile into a direct USB port - no hub in between. (Energy problem)
c) you have to switch your mobile into the "mtp" mode. (It might be in PTP mode!!)
Good luck!